Máquina extrusora de tubos de PVC One Out Two
La línea de producción de tubería de roscado de conductos de PVC tiene un producto y dos modelos, y el diámetro de la tubería de roscado de PVC-U es de 16 mm a 40 mm y de 16 mm a 63 mm. Serie 16mm-40mm: La máquina principal adopta una extrusora cónica de doble tornillo 51/105, y la producción diaria es de aproximadamente 2 toneladas Serie 16mm-63mm: La máquina principal adopta una extrusora cónica de doble tornillo 65/132, con una producción diaria de aproximadamente 4 toneladas
- Envío:
Saber más
Comparison of two one-out two-pipe production lines and one-out four-pipe production lines:
1. Production range: One production line with four production lines mainly produces φ16-φ32 mm threading pipes that are popular in the market and have a large amount. And one production line with two production lines can produce several larger models of 16-63mm
2. Total installed power: The installed power of the two production lines is similar when the output is similar.
3. Production capacity: On the premise of maintaining the product quality of the one-out two-pipe production line, the output and efficiency of the one-out four-pipe production line have increased by 60%.
4. Floor area: The floor area of the two production lines is basically the same.
5. Staffing: 2 basic operators for both production lines
6. Power loss: The one-out four-pipe production line is basically the same as the one-out two-pipe production line.
7. Total noise: After the two production lines are started normally, there is basically no noise.
8. The experience of the production line is summarized by customer feedback: one out of four is easier to operate than one out of two, and the product quality is more stable than one out of two.
